VHT SP961 Vinyl Dye Desert Sand Can - 11 oz.

VHT SP961 Vinyl Dye Desert Sand Can - 11 oz. Review

VHT SP961 Vinyl Dye Desert Sand Can - 11 oz. Feature

• Restores or changes the color of any vinyl upholstery
• Ideal for use on stiff or pliable vinyl, simulated leather or plastic
• High metallic formula assures tight seals on cork, paper and metal gaskets
• Careful preparation is essential and all traces of dirt, silicone products, vinyl, rubber protectants, oils and greases must be removed
• This item is not for sale in Catalina Island

VHT SP961 Desert Sand Vinyl Dye for vinyl or carpeting restores or changes the color of any vinyl upholstery, seats and trim, or the short nap carpeting found in today's cars, boats and watercraft. It is ideal for use on stiff or pliable vinyl, simulated leather or plastic. VHT Vinyl dye is not a paint but a true dye, which permanently changes the color of the substrate. It is extremely resistant to cracking or fading. Careful preparation is essential and all traces of dirt, silicone products, vinyl and rubber protectants, oils and greases must be removed. Incomplete preparation will not produce a satisfactory result. Follow all label instructions on each can and use with extra care as dyes are permanent. VHT vinyl dyes dries to the touch in 30 minutes and thoroughly overnight. No curing is required.

VHT SP134 Engine Enamel Ford Light Blue Can - 11 oz.

VHT SP134 Engine Enamel Ford Light Blue Can - 11 oz. Review

VHT SP134 Engine Enamel Ford Light Blue Can - 11 oz. Feature

• Excellent durability and finish
• Superior heat and chemical resistance
• Best when used with primer color paint and clear coat process
• Withstands temperatures up to 500 degrees when cured properly
• This item is not for sale in Catalina Island

VHT SP134 Ford Light Blue High Temp (500 degrees Fahrenheit) Engine Enamel has excellent durability and superior heat and chemical resistance. It is specially formulated to withstand corrosion, rust, salt spray, chemicals and additives of today's gasoline blends and degreasers. VHT's 550 degree engine enamel is a unique blend of urethane and ceramic resins, which produce a long-lasting finish for engines, engine accessories or wherever a tough durable heat and chemical resistant finish is needed. VHT SP134 is part of a multi high performance coating system for the ultimate protection and quality. The coating system consists of surface prep, strip fast, engine primer, engine color, and engine clear. VHT engine enamel dries to the touch in 30 minutes and completely over night. VHT engine enamel only attains its unique qualities after correct curing. Curing occurs with normal engine operating temperatures or parts can be heated to 200 degrees Fahrenheit. Complete application and curing process instructions are also printed on each can.

VHT Engine Enamel SP129 Gloss White 11 oz Spray

VHT Engine Enamel SP129 Gloss White 11 oz Spray Review

VHT Engine Enamel SP129 Gloss White 11 oz Spray Feature

• Excellent durability and superior heat and chemical resistance
• Applications: Headers, Engine Blocks, Starters, Brackets, Water Pumps, Valve Covers, Transmissions, Differential Covers
• Withstands temperatures up to 550°F (288°C)

VHT 550°F (288°C) Engine Enamels are available in a wide range of colors. All colors have excellent durability and superior heat and chemical resistance. They are specially formulated to withstand corrosion, rust, salt spray, chemicals and additives of today's gasoline blends and degreasers. VHT 550°F (288°C) Engine EnamelsTM are a unique blend of urethane and ceramic resins, which produce a tough and long-lasting finish for engines, engine accessories or wherever a tough durable heat or chemical resistant finish is needed. Temperature: 550°F (288°C). Applications: Headers, Engine Blocks, Starters, Brackets, Water Pumps, Valve Covers, Transmissions, Differential Covers. Dry Time: Dries to the touch in 30 mins. Dries thoroughly overnight. Ships ground service only. Hazardous, we will not ship by air freight. Can't be shipped outside of USA

VHT SP5251 Plate Finish Chrome Plus-11 oz.

VHT SP5251 Plate Finish Chrome Plus-11 oz. Review

VHT SP5251 Plate Finish Chrome Plus-11 oz. Feature

• non-tarnishing epoxy finish
• use on metal, glass or wood
• dries to touch in 30 minutes
• gives shiny plated appearance
• This item is not for sale in Catalina Island

VHT Plate Finish is a unique quick drying formulation specifically created for application on metal, glass and wood or sealed plaster surfaces. This non-tarnishing epoxy finish has outstanding brilliance and corrosion resistance. VHT Plate Finish is easy to use and dries in minutes. Excellent for touch up, re-finishing and decorating.

VHT High Temperature Exhaust Manifold Paint Aerosol Flat Gray

VHT High Temperature Exhaust Manifold Paint Aerosol Flat Gray Review

• Durable Silica-Ceramic Coating
• Resist Heat Up to 2000° F
• Matte/Flat Finish

VHT's Flameproof coatings will renew and extend the life of any surface exposed to high temperatures. This coating is a matte/flat finish, with a silicone base. Coating withstand temperatures up to 2000°F Ideal for exhaust systems, headers and engine components. Flameproof coatings cure on the vehicle while in service. See applications tab for curing instructions. 11oz Aerosol

VHT High Temperature Engine Paint Aerosol GM Satin Black

VHT High Temperature Engine Paint Aerosol GM Satin Black Review

• Chemical Resistant Durable Coating
• Resist Heat Up to 550° F
• Provides Brilliant Long-Lasting Finish

VHT's Engine Enamel aerosols offer good heat dissipation and gloss retention. Resins offer protection up to 550° intermittently and resist most automotive chemicals. Provides brilliant finish that will not blister, flake or peel. For use on engine blocks and engine accessories. Coating will not stand up to cylinder head and exhaust port temperatures.

VHT High Temperature Engine Paint Aerosol Rocket Red

VHT High Temperature Engine Paint Aerosol Rocket Red Review

• Chemical Resistant Durable Coating
• Resist Heat Up to 550° F
• Provides Brilliant Long-Lasting Finish

VHT's Engine Enamel aerosols offer good heat dissipation and gloss retention. Resins offer protection up to 550° intermittently and resist most automotive chemicals. Provides brilliant finish that will not blister, flake or peel. For use on engine blocks and engine accessories. Coating will not stand up to cylinder head and exhaust port temperatures.

VHT SP962 Vinyl Dye Red Can - 11 oz.

VHT SP962 Vinyl Dye Red Can - 11 oz. Review

VHT SP962 Vinyl Dye Red Can - 11 oz. Feature

• Restores or changes the color of any vinyl upholstery
• Ideal for use on stiff or pliable vinyl, simulated leather or plastic
• High metallic formula assures tight seals on cork, paper and metal gaskets
• Careful preparation is essential and all traces of dirt, silicone products, vinyl, rubber protectants, oils and greases must be removed
• This item is not for sale in Catalina Island

VHT SP962 Red Satin Vinyl Dye for vinyl or carpeting restores or changes the color of any vinyl upholstery, seats and trim, or the short nap carpeting found in today's cars, boats and watercraft. It is ideal for use on stiff or pliable vinyl, simulated leather or plastic. VHT Vinyl dye is not a paint but a true dye, which permanently changes the color of the substrate. It is extremely resistant to cracking or fading. Careful preparation is essential and all traces of dirt, silicone products, vinyl and rubber protectants, oils and greases must be removed. Incomplete preparation will not produce a satisfactory result. Follow all label instructions on each can and use with extra care as dyes are permanent. VHT vinyl dyes dries to the touch in 30 minutes and thoroughly overnight. No curing is required.

VHT SP304 Prime Coat Light Gray Sandable Primer Filler Can - 11 oz.

VHT SP304 Prime Coat Light Gray Sandable Primer Filler Can - 11 oz. Review

VHT SP304 Prime Coat Light Gray Sandable Primer Filler Can - 11 oz. Feature

• Premium primer filler is an excellent foundation for any enamel, acrylic or synthetic lacquer
• Provides a tough, air dry base with excellent adhesion to intermediate and top coatings
• VHT prime coat is specially formulated to fill scratches or pin holes
• Multi-purpose product that can be used on metal, fiberglass, masonry, wood and most plastic surfaces
• This item is not for sale in Catalina Island

VHT SP304 Light Gray Prime Coat Premium Primer Filler is an excellent foundation for any enamel, acrylic or synthetic lacquer. It provides a tough, air dry base with excellent adhesion to intermediate and top coatings. VHT prime coat is specially formulated to fill scratches or pin holes caused by sanding or body fillers to form a strong corrosion barrier. It is a multi-purpose product and can be used on metal, fiberglass, masonry, wood and most plastic surfaces. It is ideal for automotive, marine, aviation, home, farm, and industrial use. Primer will dry in 30 to 45 minutes for sanding purposes.

VHT SP21A Copper Gasket Cement Can - 12 oz.

VHT SP21A Copper Gasket Cement Can - 12 oz. Review

VHT SP21A Copper Gasket Cement Can - 12 oz. Feature

• Same ingredients as the world renowned high temperature coating
• Gasket cement maintains excellent adhesion under severe pressure and heat fluctuations
• Provides a multi-high performance coating system
• Copper gasket cement has been extensively tested on racing engines
• This item is not for sale in Catalina Island

VHT SP21A Copper Gasket Cement is specially formulated with the same ingredients as the world renowned high temperature coating.VHT copper gasket cement maintains excellent adhesion under severe pressure and heat fluctuations. The high metallic formula assures tight seals on cork, paper and metal gaskets. VHT copper gasket cement has been extensively tested on racing engines in the field and on the dynamometer. It has met or exceeded the high compression and high temperature requirements of these mega horsepower engines. Use per instructions printed on the can.

VHT High Temperature Flat Gray Primer 11 oz

VHT High Temperature Flat Gray Primer 11 oz Review

VHT's Flameproof coatings will renew and extend the life of any surface exposed to high temperatures. This coating is a matte/flat finish, with a silicone base. Coating will withstand temperatures up to 2000°F Ideal for exhaust systems, headers and engine components. Flameproof coatings cure on the vehicle while in service.

To apply on vehicle - Ensure surface is clean and free of greases and oils. Paint must be air dried before putting on vehicle. Run at idle for 10 minutes. Cool for 20 minutes. Run at idle for 20 minutes, let cool for 20 minutes. Run at normal operating temperature for 30 minutes, let cool for 30minutes. Consult can label for specific curing procedures. DO NOT exceed temperature of the least heat tolerant component or base metal.

VHT Engine Enamel SP29 Motor-Bright Clear 11 oz Spray

VHT Engine Enamel SP29 Motor-Bright Clear 11 oz Spray Review

VHT Engine Enamel SP29 Motor-Bright Clear 11 oz Spray Feature

• Excellent durability and superior heat and chemical resistance
• Applications: Headers, Engine Blocks, Starters, Brackets, Water Pumps, Valve Covers, Transmissions, Differential Covers
• Withstands temperatures up to 550°F (288°C)

VHT 550°F (288°C) Engine Enamels are available in a wide range of colors. All colors have excellent durability and superior heat and chemical resistance. They are specially formulated to withstand corrosion, rust, salt spray, chemicals and additives of today's gasoline blends and degreasers. VHT 550°F (288°C) Engine EnamelsTM are a unique blend of urethane and ceramic resins, which produce a tough and long-lasting finish for engines, engine accessories or wherever a tough durable heat or chemical resistant finish is needed. Temperature: 550°F (288°C). Applications: Headers, Engine Blocks, Starters, Brackets, Water Pumps, Valve Covers, Transmissions, Differential Covers. Dry Time: Dries to the touch in 30 mins. Dries thoroughly overnight. Ships ground service only. Hazardous, we will not ship by air freight. Can't be shipped outside of USA

VHT Caliper Paint SP731 Real Red 11 oz Spray

VHT Caliper Paint SP731 Real Red 11 oz Spray Review

VHT Caliper Paint SP731 Real Red 11 oz Spray Feature

• High Heat resistant up to 900°F
• Fast Drying Durable Finish
• Resistant To Chipping/Chemicals/Brake Dust
• For Use On Brake Calipers/Rotors/Drums
• Ships ground service only. Hazardous, we will not ship by air freight. Can't be shipped outside of USA

VHT Brake, Caliper. Drum & Rotor Coatings have been specifically designed for the custom detailing of brake components. It is heat resistant to 900°F (482°C) and will not chip, crack, fade or rust even under extremes of operation or road and weather conditions. It is easy to apply, dries quickly and is remarkably resistant. Careful preparation is essential. Temperature: 900°F (482°C). Applications: Brake Calipers, Rotors, Brake Drums. Finish: Gloss

VHT SP137 Engine Enamel Ford Gray Can - 11 oz.

VHT SP137 Engine Enamel Ford Gray Can - 11 oz. Review

VHT SP137 Engine Enamel Ford Gray Can - 11 oz. Feature

• Excellent durability and finish
• Superior heat and chemical resistance
• Best when used with primer color paint and clear coat process
• Withstands temperatures up to 500 degrees when cured properly
• This item is not for sale in Catalina Island

VHT SP137 Ford Grey High Temp (500 degrees Fahrenheit) Engine Enamel has excellent durability and superior heat and chemical resistance. It is specially formulated to withstand corrosion, rust, salt spray, chemicals and additives of today's gasoline blends and degreasers. VHT's 550 degree engine enamel is a unique blend of urethane and ceramic resins, which produce a long-lasting finish for engines, engine accessories or wherever a tough durable heat and chemical resistant finish is needed. VHT SP137 is part of a multi high performance coating system for the ultimate protection and quality. The coating system consists of surface prep, strip fast, engine primer, engine color, and engine clear. VHT engine enamel dries to the touch in 30 minutes and completely over night. VHT engine enamel only attains its unique qualities after correct curing. Curing occurs with normal engine operating temperatures or parts can be heated to 200 degrees Fahrenheit. Complete application and curing process instructions are also printed on each can.

VHT SP110 FlameProof Coating Flat Blue Paint Can - 11 oz.

VHT SP110 FlameProof Coating Flat Blue Paint Can - 11 oz. Review

VHT SP110 FlameProof Coating Flat Blue Paint Can - 11 oz. Feature

• Flame proof coating extends life of high heat surfaces
• Matte finish ceramic silicone base widely used on automotive exhaust
• Best when used with primer color paint and clear coat process
• Withstands temperatures up to 2000 degrees when cured properly
• This item is not for sale in Catalina Island

VHT Flame Proof Coating SP110 Flat Blue is the color coat for the three part multi high performance coating system. VHT Flame Proof Coating will extend the life of any surface exposed to extremely high temperatures. This unique coating is a matte finish, silicone ceramic base widely used by the automotive industry on exhaust systems, and the aerospace industry for jet engines, re-entry vehicles and other high temperature applications. VHT Flameproof Coating will withstand temperatures up to 2000 degrees Fahrenheit (1093 degrees Celsius) and is ideal for use on headers, exhaust systems, or wherever an extreme temperature coating is needed. VHT provides a multi high performance coating system for the ultimate protection and quality. The system of primer, paint and clear coat finish is applied with a curing process to insure top performance. VHT Flameproof coating only attains its unique properties after correct curing. Curing can be done on the vehicle or off the vehicle by using the following steps. ON the vehicle, paint must be completely dry, run engine at idle for 10 minutes, cool for 20 minutes, run at idle for 20 minutes, cool for 20 minutes, run at normal operating conditions for 30 minutes. OFF the vehicle, paint must be completely dry before curing, heat to 250 degrees for 30 minutes, cool for 30 minutes, heat to 400 degrees for 30 minutes, cool for 30 minutes, heat to 650 degrees for 30 minutes. (CAUTION: Do not exceed the temperature of the least heat tolerant component or the base metal.) Complete application and curing instructions are also printed on every can.

VHT Caliper Paint SP736 Gold 11 oz Spray

VHT Caliper Paint SP736 Gold 11 oz Spray Review

VHT Caliper Paint SP736 Gold 11 oz Spray Feature

• High Heat resistant up to 900°F
• Fast Drying Durable Finish
• Resistant To Chipping/Chemicals/Brake Dust
• For Use On Brake Calipers/Rotors/Drums
• Ships ground service only. Hazardous, we will not ship by air freight. Can't be shipped outside of USA

VHT Brake, Caliper. Drum & Rotor Coatings have been specifically designed for the custom detailing of brake components. It is heat resistant to 900°F (482°C) and will not chip, crack, fade or rust even under extremes of operation or road and weather conditions. It is easy to apply, dries quickly and is remarkably resistant. Careful preparation is essential. Temperature: 900°F (482°C). Applications: Brake Calipers, Rotors, Brake Drums. Finish: Gloss

VHT SP188 Ford Argent Silver Wheel Paint Can - 11 oz.

VHT SP188 Ford Argent Silver Wheel Paint Can - 11 oz. Review

VHT SP188 Ford Argent Silver Wheel Paint Can - 11 oz. Feature

• Aluminum high heat wheel paint is a polyurethane paint specifically designed for steel and aluminum wheels
• Superior heat and chemical resistance
• Best when used with primer color paint and clear coat process
• Withstands temperatures up to 900 degrees when cured properly
• This item is not for sale in Catalina Island

VHT SP188 Ford Argent Silver High Heat Wheel Paint is a polyurethane paint specifically designed for steel and aluminum wheels. VHT wheel paint provides a great finish and real protection for all standard and custom wheels. Wheels take a beating both on and off the road from sand, salt, sun, brake dust and rocks which severely damage the appearance and protection of the wheel surface. This unique product resists chipping, cracking and fading, while protecting the wheel surface from oxidation. Careful preparation is essential to insure proper adhesion. VHT wheel paint is part of a multi high performance coating system. The coating system products consist of primer, paint, and clear coat. VHT wheel paint dries to the touch in 30 minutes and completely over night. Complete application and instructions are also printed on each can.